How To Remove Aluminum Blinds

Download Commodity

Download Article

You tin can hands remove your Venetian blinds at abode using a few unproblematic tools. The method you should use to take downwards your blinds depends on whether they take standard or spring-loaded brackets. If yous're not sure, accept a look at your blinds. If they're held upwards by brackets that clip over the front side of the blinds, they're standard. If not, the brackets are nearly probable spring-loaded.

1

Use the drawstring to elevator the bullheaded blades all the fashion up. Pull the drawstring downwardly and away from the blind with your mitt so the blades go up and lock into place. Once the blades are all the mode up, allow go of the drawstring.^[1]
2

Use a screwdriver to lift up the bracket on each side of the blind. Standard brackets have a piece that clips into place over the front end-facing side of the blind. Starting with one of the brackets, wedge the tip of the screwdriver between the clipped piece and the blind. And so, pull the screwdriver abroad from the bullheaded to release the clipped slice and open up the bracket. Repeat on the other bracket.^[2]

Advertisement
iii

Slide the bullheaded out of the open brackets. Grab a hold of the blind with both of your hands and gently pull it toward you. Now that the brackets are lifted up, the bullheaded should easily slide out and away from the window. Once the blind is off, set it bated.^[3]
iv
Unscrew the brackets from the window using a drill with a Phillips drill bit. Printing the reverse switch on your drill so the drill fleck will spin counterclockwise. Then, position the drill bit in one of the screws attaching the brackets to the window and press and hold the on switch. Once you lot've unscrewed the screw and bracket, identify them in a pocket-size plastic bag and so you don't lose them. Echo with the screw on the other subclass.^[4]
- Hold the brackets with your free hand equally you're drilling and then they don't fall one time the screws are out.
Advertizing

1

Pull the blind blades all the way up using the drawstring. Grab the drawstring and pull it down and away from the blinds. The blind blades should lift upwards and lock into place at the peak of the window.^[5]
2

Locate ane of the bound-loaded brackets property up the blind. The brackets should look like small metallic squares resting on the top of the blind. They'll be sandwiched between the blind and the window frame. If you're having trouble locating ane, look toward the ends of the blinds.^[6]
iii
Release the bracket by pushing the bullheaded in and rotating information technology downward toward you. Place both easily on the blind, one on each side of the bracket. Push in toward the window using your easily. Then, rotate the top of the blind down toward y'all so information technology releases from the subclass. Yous should hear a clicking noise as it releases.^[7]
- Get out the blind resting on the bracket after y'all release it and then yous don't have to hold it up while you're releasing the other subclass.
4

Release the other bracket and pull the blind off the window. Release the other subclass using the same motility you used to release the outset one. Then, grab a hold of the blind and pull it away from the bracket and window.^[8]
5
Employ a drill and Phillips drill chip to take downwards the bullheaded brackets. Set your drill bit to turn counterclockwise past pressing the contrary switch. Then, insert the drill chip into the screw connecting one of the brackets to the window. Printing the on switch to starting time the drill and unscrew the screw from the bracket. Once the screw and subclass are off the wall, repeat on the other bracket.^[9]
- Put the screws and brackets in a small plastic bag so yous don't lose them.
Advertisement

Ask a Question

200 characters left

Include your email address to go a message when this question is answered.

Submit

Cheers for submitting a tip for review!

Things Yous'll Need

Screwdriver
Drill
Phillips drill bit

About This Article

Article Summary X

Venetian blinds are like shooting fish in a barrel to remove with simply a screwdriver. First, you lot'll need to raise the blind all the manner upward. From there, the removal process will depend on what type of brackets your blinds take. For standard brackets, all you need to do is lift the border of each side with a screwdriver and slide the bullheaded out. For spring-loaded blinds, you'll need to push the bullheaded towards the window while rotating it downward towards you. Once y'all've removed the bullheaded, unscrew the brackets with a screwdriver, or attach your new blinds. For more tips, including how to avert losing your brackets once y'all remove them, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 91,303 times.